Lldp tx-delay – LevelOne GTL-2691 User Manual

Page 1290

Advertising
background image

C

HAPTER

43

| LLDP Commands

– 1290 –

C

OMMAND

M

ODE

Global Configuration

C

OMMAND

U

SAGE

When LLDP is re-initialized on a port, all information in the remote systems

LLDP MIB associated with this port is deleted.

E

XAMPLE

Console(config)#lldp reinit-delay 10

Console(config)#

lldp tx-delay

This command configures a delay between the successive transmission of

advertisements initiated by a change in local LLDP MIB variables. Use the

no form to restore the default setting.

S

YNTAX

lldp

tx

-delay seconds

no lldp

tx

-delay

seconds - Specifies the transmit delay. (Range: 1 - 8192 seconds)

D

EFAULT

S

ETTING

2 seconds

C

OMMAND

M

ODE

Global Configuration

C

OMMAND

U

SAGE

◆

The transmit delay is used to prevent a series of successive LLDP

transmissions during a short period of rapid changes in local LLDP MIB

objects, and to increase the probability that multiple, rather than single

changes, are reported in each transmission.

◆

This attribute must comply with the following rule:
(4 * tx-delay) ≤

refresh-interval

E

XAMPLE

Console(config)#lldp tx-delay 10

Console(config)#

Advertising