LevelOne GTL-2691 - Manual (Page 346)

C HAPTER 13 | Security Measures
Configuring the Secure Shell
– 346 –
C ONFIGURING THE
SSH S ERVER
Use the Security > SSH (Configure Global) page to enable the SSH server
and configure basic settings for authentication.
N OTE :
A host key pair must be configured on the switch before you can
enable the SSH server. See "Generating the Host Key Pair" on page 347 .
CLI R EFERENCES
◆ "Secure Shell" on page 889
P ARAMETERS
These parameters are displayed:
◆ SSH Server Status – Allows you to enable/disable the SSH server on
the switch. (Default: Disabled)
◆ Version – The Secure Shell version number. Version 2.0 is displayed,
but the switch supports management access via either SSH Version 1.5
or 2.0 clients.
◆ Authentication Timeout – Specifies the time interval in seconds that
the SSH server waits for a response from a client during an
authentication attempt. (Range: 1-120 seconds; Default: 120 seconds)
◆ Authentication Retries – Specifies the number of authentication
attempts that a client is allowed before authentication fails and the
client has to restart the authentication process. (Range: 1-5 times;
Default: 3)
◆ Server-Key Size – Specifies the SSH server key size.
(Range: 512-896 bits; Default:768)
■
The server key is a private key that is never shared outside the
switch.
■
The host key is shared with the SSH client, and is fixed at 1024 bits.
W EB I NTERFACE
To configure the SSH server:
1. Click Security, SSH.
2. Select Configure Global from the Step list.
3. Enable the SSH server.
4. Adjust the authentication parameters as required.
5. Click Apply.