Figure 233: creating an snmp group, Figure 234: showing snmp groups – LevelOne GTL-2691 User Manual
Page 438
Advertising
C
HAPTER
14
| Basic Administration Protocols
Simple Network Management Protocol
– 438 –
W
EB
I
NTERFACE
To configure an SNMP group:
1.
Click Administration, SNMP.
2.
Select Configure Group from the Step list.
3.
Select Add from the Action list.
4.
Enter a group name, assign a security model and level, and then select
read, write, and notify views.
5.
Click Apply
Figure 233: Creating an SNMP Group
To show SNMP groups:
1.
Click Administration, SNMP.
2.
Select Configure Group from the Step list.
3.
Select Show from the Action list.
Figure 234: Showing SNMP Groups
Advertising