LevelOne GTL-2691 - Manual (Page 395)

C HAPTER 13 | Security Measures
IP Source Guard
– 395 –
4. Click Apply
Figure 206: Configuring Static Bindings for IP Source Guard
To display static bindings for IP Source Guard:
1.
Click Security, IP Source Guard, Static Configuration.
2.
Select Show from the Action list.
Figure 207: Displaying Static Bindings for IP Source Guard
D ISPLAYING
I NFORMATION FOR
D YNAMIC IP S OURCE
G UARD B INDINGS
Use the Security > IP Source Guard > Dynamic Binding page to display the
source-guard binding table for a selected interface.
CLI R EFERENCES
◆ "show ip dhcp snooping binding" on page 955
P ARAMETERS
These parameters are displayed:
Query by
◆ Port – A port on this switch.
◆ VLAN – ID of a configured VLAN (Range: 1-4093)
◆ MAC Address – A valid unicast MAC address.