LevelOne GTL-2691 - Manual (Page 298)

C HAPTER 11 | Quality of Service
Creating QoS Policies
– 298 –
■
Transmit – Transmits in-conformance traffic without any
change to the DSCP service level.
■
Exceed – Specifies whether traffic that exceeds the maximum
rate (CIR) but is within the peak information rate (PIR) will be
dropped or the DSCP service level will be reduced.
■
Set IP DSCP – Decreases DSCP priority for out of
conformance traffic. (Range: 0-63).
■
Drop – Drops out of conformance traffic.
■
Violate – Specifies whether the traffic that exceeds the peak
information rate (PIR) will be dropped or the DSCP service level
will be reduced.
■
Set IP DSCP – Decreases DSCP priority for out of
conformance traffic. (Range: 0-63).
■
Drop – Drops out of conformance traffic.
W EB I NTERFACE
To configure a policy map:
1.
Click Traffic, DiffServ.
2. Select Configure Policy from the Step list.
3.
Select Add from the Action list.
4.
Enter a policy name.
5.
Enter a description.
6.
Click Add.
Figure 135: Configuring a Policy Map