LevelOne GTL-2691 - Manual (Page 1389)

C HAPTER 47 | VRRP Commands
– 1389 –
E XAMPLE
This example displays the full listing of status information for VLAN 1.
Console#show vrrp interface vlan 1
VLAN 1 - Group 1,
State Master
Virtual IP Address 192.168.1.6
Virtual MAC Address 00-00-5E-00-01-01
Advertisement Interval 5 sec
Preemption Enabled
Min Delay 10 sec
Priority 1
Authentication SimpleText
Authentication Key bluebird
Master Router 192.168.1.6
Master Priority 1
Master Advertisement Interval 5 sec
Master Down Interval 15
Console#
* Refer to the show vrrp command for a description of the display items.
show vrrp interface
counters
This command displays counters for VRRP protocol events and errors that
have occurred for the specified group and interface.
show vrrp group interface vlan interface counters
group - Identifies a VRRP group. (Range: 1-255)
interface - Identifier of configured VLAN interface. (Range: 1-4093)
D EFAULTS
None
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#show vrrp 1 interface vlan 1 counters
Total Number of Times Transitioned to MASTER : 6
Total Number of Received Advertisements Packets : 0
Total Number of Received Error Advertisement Interval Packets : 0
Total Number of Received Authentication Failures Packets : 0
Total Number of Received Error IP TTL VRRP Packets : 0
Total Number of Received Priority 0 VRRP Packets : 0
Total Number of Sent Priority 0 VRRP Packets : 5
Total Number of Received Invalid Type VRRP Packets : 0
Total Number of Received Error Address List VRRP Packets : 0
Total Number of Received Invalid Authentication Type VRRP Packets : 0
Total Number of Received Mismatch Authentication Type VRRP Packets : 0
Total Number of Received Error Packet Length VRRP Packets : 0
Console#
* Refer to "Displaying VRRP Group Statistics" on page 647 for a description of the display
items.