Figure 129: mapping ip port number priority values – LevelOne GTL-2691 User Manual
Page 285
C
HAPTER
10
| Class of Service
Layer 3/4 Priority Settings
– 285 –
C
OMMAND
U
SAGE
◆
This mapping table is only used if the protocol type of the arriving
packet is TCP or UDP. Some of the more common TCP service ports
include: HTTP: 80, FTP: 21, Telnet: 23 and POP3: 110.
◆
No default mapping is defined for ingress TCP/UDP port types.
N
OTE
:
IP Port settings apply to all interfaces.
P
ARAMETERS
These parameters are displayed:
◆
IP Port Mapping Status – Enables or disables the use of TCP/UDP
destination port numbers priorities and the mapping of these priority
values to CoS values. (Default: Disabled)
◆
TCP/UDP Port – 16-bit TCP/UDP destination port number.
(Range: 0-65535)
◆
CoS – Class-of-Service value (Range: 0-7)
W
EB
I
NTERFACE
To set the TCP/UDP port number to CoS priority map:
1.
Click Traffic, Priority, IP Port to CoS.
2.
Select Add from the Action list.
3.
Set the CoS priority for any TCP or UDP port.
4.
Click Apply.
Figure 129: Mapping IP Port Number Priority Values