Figure 48: showing members of a dynamic trunk – LevelOne GTL-2691 User Manual
Page 182
Advertising
C
HAPTER
5
| Interface Configuration
Trunk Configuration
– 182 –
Figure 48: Showing Members of a Dynamic Trunk
To configure connection parameters for a dynamic trunk:
1.
Click Interface, Trunk, Dynamic.
2.
Select Configure Trunk from the Step List.
3.
Select Configure from the Action List.
4.
Modify the required interface settings. (See
for a description of the interface settings.)
5.
Click Apply.
Figure 49: Configuring Connection Settings for Dynamic Trunks
To show connection parameters for a dynamic trunk:
1.
Click Interface, Trunk, Dynamic.
2.
Select Configure Trunk from the Step List.
3.
Select Show from the Action List.
Advertising