Displaying local mips, Figure 283: showing information on local mips – LevelOne GTL-2691 User Manual
Page 503
C
HAPTER
14
| Basic Administration Protocols
Connectivity Fault Management
– 503 –
D
ISPLAYING
L
OCAL
MIP
S
Use the Administration > CFM > Show Information (Show Local MIP) page
to show the MIPs on this device discovered by the CFM protocol. (For a
description of MIPs, refer to the Command Usage section under
"Configuring CFM Maintenance Domains"
.)
CLI R
EFERENCES
◆
"show ethernet cfm maintenance-points local" on page 1325
P
ARAMETERS
These parameters are displayed:
◆
MD Name – Maintenance domain name.
◆
Level – Authorized maintenance level for this domain.
◆
MA Name – Maintenance association name.
◆
Primary VLAN – Service VLAN ID.
◆
Interface – Physical interface of this entry (either a port or trunk).
W
EB
I
NTERFACE
To show information for the MIPs discovered by the CFM protocol:
1.
Click Administration, CFM.
2.
Select Show Information from the Step list.
3.
Select Show Local MIP from the Action list.
Figure 283: Showing Information on Local MIPs