Hostname, Switch all renumber, Hostname 768 switch all renumber – LevelOne GTL-2691 User Manual
Page 768
C
HAPTER
24
| System Management Commands
Device Designation
– 768 –
hostname
This command specifies or modifies the host name for this device. Use the
no form to restore the default host name.
S
YNTAX
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
Console(config)#hostname RD#1
Console(config)#
switch all renumber
This command resets the switch unit identification numbers in the stack.
All stack members are numbered sequentially starting from the top unit for
a non-loop stack, or starting from the Master unit for a looped stack.
S
YNTAX
switch all renumber
D
EFAULT
S
ETTING
◆
For non-loop stacking, the top unit is unit 1.
◆
For loop stacking, the master unit is unit 1.
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
M
ODE
The system will restart after renumbering is completed.
E
XAMPLE
This example shows how to renumber all units.
Console#switch all renumber
Console#