LevelOne GTL-2691 - Manual (Page 325)

C HAPTER 13 | Security Measures
Configuring User Accounts
– 325 –
To display a the configured authorization method and assigned server
groups for The Exec service type:
1.
Click Security, AAA, Authorization.
2. Select Show Information from the Step list.
Figure 160: Displaying the Applied AAA Authorization Method
C ONFIGURING U SER A CCOUNTS
Use the Security > User Accounts page to control management access to
the switch based on manually configured user names and passwords.
CLI R EFERENCES
◆ "User Accounts" on page 864
C OMMAND U SAGE
◆ The default guest name is “guest” with the password “guest.” The
default administrator name is “admin” with the password “admin.”
◆ The guest only has read access for most configuration parameters.
However, the administrator has write access for all parameters
governing the onboard agent. You should therefore assign a new
administrator password as soon as possible, and store it in a safe place.
P ARAMETERS
These parameters are displayed:
◆ User Name – The name of the user.
(Maximum length: 8 characters; maximum number of users: 16)
◆ Access Level – Specifies the user level. (Options: 0 - Normal,
15 - Privileged)
Normal privilege level provides access to a limited number of the
commands which display the current status of the switch, as well as
several database clear and reset functions. Privileged level provides full
access to all commands.
◆ Password Type – Specifies the following options:
■
No Password – No password is required for this user to log in.