LevelOne GTL-2691 - Manual (Page 1562)

C HAPTER 50 | Multicast Routing Commands
PIM Multicast Routing
– 1562 –
show ip pim
neighbor
This command displays information about PIM neighbors.
S YNTAX
show ip pim neighbor [interface vlan vlan-id]
vlan-id - VLAN ID (Range: 1-4094)
D EFAULT S ETTING
Displays information for all known PIM neighbors.
C OMMAND M ODE
Normal Exec, Privileged Exec
E XAMPLE
Console#show ip pim neighbor
Neighbor Address VLAN Interface Uptime (sec.) Expiration Time (sec)
---------------- -------------- ------------- ---------------------
192.168.0.3/32 1 00:00:21 00:01:30
Console#
PIM-DM Commands
ip pim graft-retry-
interval
This command configures the time to wait for a Graft acknowledgement
before re-sending a Graft. Use the no form to restore the default value.
S YNTAX
ip pim graft-retry-interval seconds
no ip pim graft-retry-interval
seconds - The time before re-sending a Graft.
(Range: 1-10 seconds)
D EFAULT S ETTING
3 seconds
C OMMAND M ODE
Interface Configuration (VLAN)
Table 230: show ip pim neighbor - display description
Field Description
Neighbor Address
IP address of the next-hop router.
VLAN Interface
Interface number that is attached to this neighbor.
Uptime
The duration this entry has been active.
Expiration Time
The time before this entry will be removed.