Ipv6 nd ra lifetime – LevelOne GTL-2691 User Manual

Page 1435

Advertising
background image

C

HAPTER

48

| IP Interface Commands

IPv6 Interface

– 1435 –

by the system (33% of the maximum RA interval) and the maximum

value set by the ipv6 nd ra interval command.

E

XAMPLE

The following sets the maximum RA interval to 1800 seconds:

Console(config)#interface vlan 1

Console(config)#ipv6 nd ra interval 1800

Console(config)#

ipv6 nd ra lifetime

This command configures the router lifetime value used in IPv6 router

advertisements sent from an interface. Use the no form to restore the

default setting.

S

YNTAX

ipv6 nd ra lifetime lifetime
no ipv6 nd ra lifetime

lifetime - Router lifetime. (Range: 0-90000 seconds)

C

OMMAND

M

ODE

Interface Configuration (VLAN)

D

EFAULT

S

ETTING

1800 seconds

C

OMMAND

U

SAGE

This command can be used to indicate the usefulness of this router as a

default router on this interface.

Set the router lifetime to 0 to indicate that this router should not be

considered a default router. Set the lifetime to a non-zero value to

indicate that it should be considered a default router. When a non-zero

value is used, the lifetime should not be less than the router

advertisement interval.

E

XAMPLE

The following sets the router lifetime to 8000 seconds:

Console(config)#interface vlan 1

Console(config)#ipv6 nd ra lifetime 8000

Console(config)#

Advertising