Spanning-tree port- priority, Spanning-tree root- guard, Spanning-tree port-priority – LevelOne GTL-2691 User Manual

Page 1082: Spanning-tree root-guard

Advertising
background image

C

HAPTER

37

| Spanning Tree Commands

– 1082 –

spanning-tree port-

priority

This command configures the priority for the specified interface. Use the

no form to restore the default.

S

YNTAX

spanning-tree port-priority priority
no spanning-tree port-priority

priority - The priority for a port. (Range: 0-240, in steps of 16)

D

EFAULT

S

ETTING

128

C

OMMAND

M

ODE

Interface Configuration (Ethernet, Port Channel)

C

OMMAND

U

SAGE

◆

This command defines the priority for the use of a port in the Spanning

Tree Algorithm. If the path cost for all ports on a switch are the same,

the port with the highest priority (that is, lowest value) will be

configured as an active link in the spanning tree.

◆

Where more than one port is assigned the highest priority, the port with

lowest numeric identifier will be enabled.

E

XAMPLE

Console(config)#interface ethernet 1/5

Console(config-if)#spanning-tree port-priority 0

R

ELATED

C

OMMANDS

spanning-tree cost (1074)

spanning-tree root-

guard

This command prevents a designated port

23

from taking superior BPDUs

into account and allowing a new STP root port to be elected. Use the no

form to disable this feature.

S

YNTAX

[no] spanning-tree root-guard

D

EFAULT

S

ETTING

Disabled

C

OMMAND

M

ODE

Interface Configuration (Ethernet, Port Channel)

23. See Port Role under

"Displaying Interface Settings for STA" on page 255

.

Advertising