LevelOne GTL-2691 - Manual (Page 850)

C HAPTER 26 | Remote Monitoring Commands
– 850 –
◆ The specified events determine the action to take when an alarm
triggers this event. The response to an alarm can include logging the
alarm or sending a message to a trap manager.
E XAMPLE
Console(config)#rmon event 2 log description urgent owner mike
Console(config)#
rmon collection
history
This command periodically samples statistics on a physical interface. Use
the no form to disable periodic sampling.
S YNTAX
rmon collection history controlEntry index
[[owner name] [buckets number] [interval seconds]] |
[buckets number] [interval seconds] | interval seconds
no rmon collection history controlEntry index
index – Index to this entry. (Range: 1-65535)
number – The number of buckets requested for this entry.
(Range: 1-65536)
seconds – The polling interval. (Range: 1-3600 seconds)
name – Name of the person who created this entry.
(Range: 1-127 characters)
D EFAULT S ETTING
1.3.6.1.2.1.16.1.1.1.6.1 - 1.3.6.1.2.1.16.1.1.1.6.26
Buckets: 8
Interval: 30 seconds for even numbered entries,
1800 seconds for odd numbered entries
C OMMAND M ODE
Interface Configuration (Ethernet)
C OMMAND U SAGE
◆ By default, each index number equates to a port on the switch, but can
be changed to any number not currently in use.
◆ If periodic sampling is already enabled on an interface, the entry must
be deleted before any changes can be made with this command.
◆ The information collected for each sample includes:
input octets, packets, broadcast packets, multicast packets, undersize
packets, oversize packets, fragments, jabbers, CRC alignment errors,
collisions, drop events, and network utilization.