LevelOne GTL-2691 - Manual (Page 846)

C HAPTER 25 | SNMP Commands
Additional Trap Commands
– 846 –
C OMMAND U SAGE
Once the rising alarm threshold is exceeded, utilization must drop beneath
the falling threshold before the alarm is terminated, and then exceed the
rising threshold again before another alarm is triggered.
E XAMPLE
Console(config)#memory rising 80
Console(config)#memory falling 60
Console#
R ELATED C OMMANDS
show memory (770)
process cpu This command sets an SNMP trap based on configured thresholds for CPU
utilization. Use the no form to restore the default setting.
S YNTAX
process cpu {rising rising-threshold | falling falling-threshold}
no process cpu {rising | falling}
rising-threshold - Rising threshold for CPU utilization alarm
expressed in percentage. (Range: 1-100)
falling-threshold - Falling threshold for CPU utilization alarm
expressed in percentage. (Range: 1-100)
D EFAULT S ETTING
Rising Threshold: 90%
Falling Threshold: 70%
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
Once the rising alarm threshold is exceeded, utilization must drop beneath
the falling threshold before the alarm is terminated, and then exceed the
rising threshold again before another alarm is triggered.
E XAMPLE
Console(config)#process cpu rising 80
Console(config)#process cpu falling 60
Console#
R ELATED C OMMANDS
show process cpu (770)