LevelOne GTL-2691 - Manual (Page 1295)

C HAPTER 43 | LLDP Commands
– 1295 –
lldp dot1-tlv proto-
vid
This command configures an LLDP-enabled port to advertise port related
VLAN information. Use the no form to disable this feature.
S YNTAX
[no] lldp dot1-tlv proto-vid
D EFAULT S ETTING
Enabled
C OMMAND M ODE
Interface Configuration (Ethernet, Port Channel)
C OMMAND U SAGE
This option advertises the port-based protocol VLANs configured on this
interface (see "Configuring Protocol-based VLANs" on page 1140 ).
E XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv proto-vid
Console(config-if)#
lldp dot1-tlv pvid This command configures an LLDP-enabled port to advertise its default
VLAN ID. Use the no form to disable this feature.
S YNTAX
[no] lldp dot1-tlv pvid
D EFAULT S ETTING
Enabled
C OMMAND M ODE
Interface Configuration (Ethernet, Port Channel)
C OMMAND U SAGE
The port’s default VLAN identifier (PVID) indicates the VLAN with which
untagged or priority-tagged frames are associated (see the switchport
native vlan command).
E XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv pvid
Console(config-if)#