Ip rip authentication string, Ip rip receive version, Ip rip authentication – LevelOne GTL-2691 User Manual

Page 1468: String, T by the, Ip rip receive version (1468), Ip rip, Authentication string, Ip rip authentication string (1468)

Advertising
background image

C

HAPTER

49

| IP Routing Commands

Routing Information Protocol (RIP)

– 1468 –

ip rip authentication

string

This command specifies an authentication key for RIPv2 packets. Use the

no form to delete the authentication key.

S

YNTAX

ip rip authentication string key-string
no ip rip authentication string

key-string - A password used for authentication.

(Range: 1-16 characters, case sensitive)

D

EFAULT

S

ETTING

No authentication key

C

OMMAND

M

ODE

Interface Configuration (VLAN)

C

OMMAND

U

SAGE

◆

This command can be used to restrict the interfaces that can exchange

RIPv2 routing information. (Note that this command does not apply to

RIPv1.)

◆

For authentication to function properly, both the sending and receiving

interface must be configured with the same password, and

authentication enabled by the

ip rip authentication mode

command.

E

XAMPLE

This example sets an authentication password of “small” to verify incoming

routing messages and to tag outgoing routing messages.

Console(config)#interface vlan 1

Console(config-if)#ip rip authentication string small

Console(config-if)#

R

ELATED

C

OMMANDS

ip rip authentication mode (1467)

ip rip receive

version

This command specifies a RIP version to receive on an interface. Use the

no form to restore the default value.

S

YNTAX

ip rip receive version {1 | 2}
no ip rip receive version

1 - Accepts only RIPv1 packets.
2 - Accepts only RIPv2 packets.

D

EFAULT

S

ETTING

RIPv1 or RIPv2 packets

Advertising