LevelOne GTL-2691 - Manual (Page 1379)

C HAPTER 46 | DHCP Commands
DHCP Server
– 1379 –
E XAMPLE
Console(config-dhcp)#next-server 10.1.0.21
Console(config-dhcp)#
R ELATED C OMMANDS
bootfile (1371)
clear ip dhcp
binding
This command deletes an automatic address binding from the DHCP server
database.
S YNTAX
clear ip dhcp binding {address | *}
address - The address of the binding to clear.
* - Clears all automatic bindings.
D EFAULT S ETTING
None
C OMMAND M ODE
Privileged Exec
U SAGE G UIDELINES
◆ An address specifies the client’s IP address. If an asterisk (*) is used as
the address parameter, the DHCP server clears all automatic bindings.
◆ Use the no host command to delete a manual binding.
◆ This command is normally used after modifying the address pool, or
after moving DHCP service to another device.
E XAMPLE .
Console#clear ip dhcp binding *
Console#
R ELATED C OMMANDS
show ip dhcp binding (1379)
show ip dhcp
binding
This command displays address bindings on the DHCP server.
S YNTAX
show ip dhcp binding [address]
address - Specifies the IP address of the DHCP client for which
bindings will be displayed.