Displaying the pim6 bsr router, Figure 478: configuring a pim6 rp candidate – LevelOne GTL-2691 User Manual
Page 741
C
HAPTER
21
| Multicast Routing
Configuring PIMv6 for IPv6
– 741 –
multicast group address and mask indicating the groups for which this
router is bidding to become the RP.
4.
Click Apply.
Figure 478: Configuring a PIM6 RP Candidate
To display settings for an RP candidate:
1.
Click Routing Protocol, PIM6, PIM6-SM.
2.
Select RP Candidate from the Step list.
3.
Select Show from the Action list.
4.
Select an interface from the VLAN list.
Figure 479: Showing Settings for a PIM6 RP Candidate
D
ISPLAYING
THE
PIM6
BSR R
OUTER
Use the Routing Protocol > PIM6 > PIM6-SM (Show Information – Show
BSR Router) page to display Information about the bootstrap router (BSR).
CLI R
EFERENCES
◆
"show ipv6 pim bsr-router" on page 1596
P
ARAMETERS
These parameters are displayed:
◆
IP Address – IP address of interface configured as the BSR.
◆
Uptime – The time this BSR has been up and running.