LevelOne GTL-2691 User Manual
Page 606
C
HAPTER
17
| IP Services
Dynamic Host Configuration Protocol
– 606 –
◆
End IP Address – The last address in a range that the DHCP server
should not assign to DHCP clients.
N
OTE
:
Be sure you exclude the address for this switch and other key
network devices.
W
EB
I
NTERFACE
To configure IP addresses excluded for DHCP clients:
1.
Click IP Service, DHCP, Server.
2.
Select Configure Excluded Addresses from the Step list.
3.
Select Add from the Action list.
4.
Enter a single address or an address range.
5.
Click Apply.
Figure 365: Configuring Excluded Addresses on the DHCP Server
To show the IP addresses excluded for DHCP clients:
1.
Click IP Service, DHCP, Server.
2.
Select Configure Excluded Addresses from the Step list.
3.
Select Show from the Action list.
Figure 366: Showing Excluded Addresses on the DHCP Server