LevelOne GTL-2691 - Manual (Page 1319)

C HAPTER 44 | CFM Commands
Defining CFM Structures
– 1319 –
applied to this MA. For a detailed description of the MIP types, refer to
the Command Usage section under the ethernet cfm domain command.
E XAMPLE
This example creates a maintenance association, binds it to VLAN 1, and
allows MIPs to be created within this MA using the default method.
Console(config)#ethernet cfm domain index 1 name voip level 3
Console(config-ether-cfm)#ma index 1 name rd vlan 1 mip-creation default
Console(config-ether-cfm)#
ma index name-
format
This command specifies the name format for the maintenance association
as IEEE 802.1ag character based, or ITU-T SG13/SG15 Y.1731 defined ICC-
based format. Use the no form to restore the default setting.
S YNTAX
ma index index name-format {character-string | icc-based}
no ma index index name-format
index – MA identifier. (Range: 1-2147483647)
character-string – IEEE 802.1ag defined character string format.
This is an IETF RFC 2579 DisplayString.
icc-based – ITU-T SG13/SG15 Y.1731 defined ICC based format.
D EFAULT S ETTING
character-string
C OMMAND M ODE
CFM Domain Configuration
E XAMPLE
This example specifies the name format as character string.
Console(config)#ethernet cfm domain index 1 name voip level 3
Console(config-ether-cfm)#ma index 1 name-format character-string
Console(config-ether-cfm)#