Clear ipv6 traffic, Ping6, Ping6 1423 – LevelOne GTL-2691 User Manual
Page 1423
C
HAPTER
48
| IP Interface Commands
IPv6 Interface
– 1423 –
clear ipv6 traffic
This command resets IPv6 traffic counters.
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
This command resets all of the counters displayed by the
command.
E
XAMPLE
Console#clear ipv6 traffic
Console#
ping6
This command sends (IPv6) ICMP echo request packets to another node on
the network.
S
YNTAX
ping6 {ipv6-address | host-name} [count count] [size size]
ipv6-address - The IPv6 address of a neighbor device. You can
specify either a link-local or global unicast address formatted
according to RFC 2373 “IPv6 Addressing Architecture,” using 8
colon-separated 16-bit hexadecimal values. One double colon may
be used in the address to indicate the appropriate number of zeros
required to fill the undefined fields.
host-name - A host name string which can be resolved into an IPv6
address through a domain name server.
count - Number of packets to send. (Range: 1-16)
group membership
response messages
The number of ICMPv6 Group Membership Response messages
sent.
group membership
reduction messages
The number of ICMPv6 Group Membership Reduction messages
sent.
multicast listener
discovery version 2
reports
The number of MLDv2 reports sent by the interface.
UDP Statistics
input
The total number of UDP datagrams delivered to UDP users.
no port errors
The total number of received UDP datagrams for which there was
no application at the destination port.
other errors
The number of received UDP datagrams that could not be
delivered for reasons other than the lack of an application at the
destination port.
output
The total number of UDP datagrams sent from this entity.
Table 198: show ipv6 traffic - display description (Continued)
Field
Description