Lldp dot3-tlv mac- phy, Lldp dot3-tlv max- frame, Lldp dot3-tlv mac-phy – LevelOne GTL-2691 User Manual
Page 1297: Lldp dot3-tlv max-frame, Lldp dot3-tlv max, Frame
C
HAPTER
43
| LLDP Commands
– 1297 –
lldp dot3-tlv mac-
phy
This command configures an LLDP-enabled port to advertise its MAC and
physical layer capabilities. Use the no form to disable this feature.
S
YNTAX
[no] lldp dot3-tlv mac-phy
D
EFAULT
S
ETTING
Enabled
C
OMMAND
M
ODE
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
U
SAGE
This option advertises MAC/PHY configuration/status which includes
information about auto-negotiation support/capabilities, and operational
Multistation Access Unit (MAU) type.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot3-tlv mac-phy
Console(config-if)#
lldp dot3-tlv max-
frame
This command configures an LLDP-enabled port to advertise its maximum
frame size. Use the no form to disable this feature.
S
YNTAX
[no] lldp dot3-tlv max-frame
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
U
SAGE
for information on configuring the
maximum frame size for this switch.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp dot3-tlv max-frame
Console(config-if)#