LevelOne GTL-2691 - Manual (Page 1471)

C HAPTER 49 | IP Routing Commands
Routing Information Protocol (RIP)
– 1471 –
R ELATED C OMMANDS
version (1466)
ip rip send-packet This command configures the interface to send RIP packets. Use the no
form to disable this feature.
[no] ip rip send-packet
D EFAULT S ETTING
Enabled
C OMMAND M ODE
Interface Configuration (VLAN)
D EFAULT S ETTING
Enabled
C OMMAND U SAGE
The no form of this command allows the router to passively monitor route
information advertised by other routers attached to the network, without
transmitting any RIP updates.
E XAMPLE
Console(config)#interface vlan 1
Console(config-if)#ip rip send-packet
Console(config-if)#
R ELATED C OMMANDS
ip rip receive-packet (1469)
ip rip split-horizon This command enables split-horizon or poison-reverse (a variation) on an
interface. Use the no form to disable this function.
S YNTAX
ip rip split-horizon [poisoned]
no rip ip split-horizon
poisoned - Enables poison-reverse on the current interface.
C OMMAND M ODE
Interface Configuration (VLAN)
D EFAULT S ETTING
split-horizon poisoned