Mapping ip port priority, Figure 128: mapping ip precedence priority values – LevelOne GTL-2691 User Manual
Page 284
C
HAPTER
10
| Class of Service
Layer 3/4 Priority Settings
– 284 –
N
OTE
:
IP Precedence settings apply to all interfaces.
P
ARAMETERS
These parameters are displayed:
◆
IP Precedence Mapping Status – Enables or disables the use of IP
Precedence priorities and the mapping of these priority values to CoS
values. (Default: Disabled)
◆
IP Precedence – 3-bit precedence value. (Range: 0-7)
◆
CoS – Class-of-Service value (Range: 0-7)
W
EB
I
NTERFACE
To set the IP Precedence to CoS priority map:
1.
Click Traffic, Priority, IP Precedence to CoS.
2.
Locate an entry from the IP Precedence table, and enter a value in the
CoS field.
3.
Click Apply.
Figure 128: Mapping IP Precedence Priority Values
M
APPING
IP P
ORT
P
RIORITY
Use the Traffic > Priority > IP Port to CoS page to map network
applications designated by a TCP/UDP destination port number in the frame
header to CoS values for internal processing.
CLI R
EFERENCES
◆
"map ip port (Global Configuration)" on page 1163
◆
"map ip port (Interface Configuration)" on page 1165
◆