LevelOne GTL-2691 - Manual (Page 1114)

C HAPTER 39 | VLAN Commands
Editing VLAN Groups
– 1114 –
vlan This command configures a VLAN. Use the no form to restore the default
settings or delete a VLAN.
S YNTAX
vlan vlan-id [name vlan-name] media ethernet
[state {active | suspend}] [rspan]
no vlan vlan-id [name | state]
vlan-id - VLAN ID, specified as a single number, a range of
consecutive numbers separated by a hyphen, or multiple numbers
separated by commas. (Range: 1-4093)
name - Keyword to be followed by the VLAN name.
vlan-name - ASCII string from 1 to 32 characters.
media ethernet - Ethernet media type.
state - Keyword to be followed by the VLAN state.
active - VLAN is operational.
suspend - VLAN is suspended. Suspended VLANs do not pass
packets.
rspan - Keyword to create a VLAN used for mirroring traffic
from remote switches. The VLAN used for RSPN cannot include
VLAN 1 (the switch’s default VLAN), nor VLAN 4093 (the VLAN
used for switch clustering). For more information on configuring
RSPAN through the CLI, see "RSPAN Mirroring Commands" on
page 1031 .
D EFAULT S ETTING
By default only VLAN 1 exists and is active.
C OMMAND M ODE
VLAN Database Configuration
C OMMAND U SAGE
◆ no vlan vlan-id deletes the VLAN.
◆ no vlan vlan-id name removes the VLAN name.
◆ no vlan vlan-id state returns the VLAN to the default state
(i.e., active).
◆ You can configure up to 4093 VLANs on the switch.
N OTE :
The switch allows 256 user-manageable VLANs.