LevelOne GTL-2691 - Manual (Page 510)

C HAPTER 14 | Basic Administration Protocols
Connectivity Fault Management
– 510 –
and some other MA y, at a higher maintenance level, and associated
with at least one of the VID(s) also in MA x, does have a MEP
configured on the bridge port.
■
VIDS – MA x is associated with a specific VID list 11 , an MEP is
configured facing inward (up) on this MA on the bridge port, and
some other MA y, associated with at least one of the VID(s) also in
MA x, also has an Up MEP configured facing inward (up) on some
bridge port.
■
EXCESS_LEV – The number of different MD levels at which MIPs are
to be created on this port exceeds the bridge's capabilities.
■
OVERLAP_LEV – A MEP is created for one VID at one maintenance
level, but a MEP is configured on another VID at an equivalent or
higher level, exceeding the bridge's capabilities.
◆ MA Name – The maintenance association for this entry.
W EB I NTERFACE
To show CFM continuity check errors:
1. Click Administration, CFM.
2. Select Show Information from the Step list.
3. Select Show Continuity Check Error from the Action list.
Figure 288: Showing Continuity Check Errors