LevelOne GTL-2691 - Manual (Page 819)

C HAPTER 24 | System Management Commands
Time Range
– 819 –
C OMMAND M ODE
Time Range Configuration
C OMMAND U SAGE
If a time range is already configured, you must use the no form of this
command to remove the current entry prior to configuring a new time
range.
E XAMPLE
This example configures the time for the single occurrence of an event.
Console(config)#time-range r&d
Console(config-time-range)#absolute start 1 1 1 april 2009 end 2 1 1 april
2009
Console(config-time-range)#
periodic This command sets the time range for the periodic execution of a
command. Use the no form to remove a previously specified time range.
S YNTAX
[no] periodic {daily | friday | monday | saturday | sunday |
thursday | tuesday | wednesday | weekdays | weekend}
hour minute to {daily | friday | monday | saturday | sunday |
thursday | tuesday | wednesday | weekdays | weekend |
hour minute}
daily - Daily
friday - Friday
monday - Monday
saturday - Saturday
sunday - Sunday
thursday - Thursday
tuesday - Tuesday
wednesday - Wednesday
weekdays - Weekdays
weekend - Weekends
hour - Hour in 24-hour format. (Range: 0-23)
minute - Minute. (Range: 0-59)
D EFAULT S ETTING
None
C OMMAND M ODE
Time Range Configuration