Displaying dhcp snooping binding information – LevelOne GTL-2691 User Manual
Page 402
C
HAPTER
13
| Security Measures
DHCP Snooping
– 402 –
W
EB
I
NTERFACE
To configure global settings for DHCP Snooping:
1.
Click Security, IP Source Guard, DHCP Snooping.
2.
Select Configure Interface from the Step list.
3.
Set any ports within the local network or firewall to trusted.
4.
Click Apply
Figure 211: Configuring the Port Mode for DHCP Snooping
D
ISPLAYING
DHCP
S
NOOPING
B
INDING
I
NFORMATION
Use the IP Service > DHCP > Snooping (Show Information) page to display
entries in the binding table.
CLI R
EFERENCES
◆
"show ip dhcp snooping binding" on page 955
P
ARAMETERS
These parameters are displayed:
◆
MAC Address – Physical address associated with the entry.
◆
IP Address – IP address corresponding to the client.
◆
Lease Time (seconds) – The time for which this IP address is leased to
the client.
◆
Type – Entry types include:
■
DHCP-Snooping – Dynamically snooped.
■
Static-DHCPSNP – Statically configured.
◆
VLAN – VLAN to which this entry is bound.
◆
Interface – Port or trunk to which this entry is bound.