LevelOne GTL-2691 - Manual (Page 211)

C HAPTER 6 | VLAN Configuration
Private VLANs
– 211 –
all other traffic through promiscuous ports). Then assign any
promiscuous ports to a primary VLAN and any host ports a community
VLAN.
C REATING P RIVATE
VLAN S
Use the VLAN > Private (Configure VLAN - Add) page to create primary or
community VLANs.
CLI R EFERENCES
◆ "private-vlan" on page 1136
P ARAMETERS
These parameters are displayed:
◆ VLAN ID – ID of configured VLAN (2-4093).
◆ Type – There are two types of private VLANs:
■
Primary – Conveys traffic between promiscuous ports, and to
community ports within secondary (or community) VLANs.
■
Community - Conveys traffic between community ports, and to
their promiscuous ports in the associated primary VLAN.
W EB I NTERFACE
To configure private VLANs:
1. Click VLAN, Private.
2. Select Configure VLAN from the Step list.
3. Select Add from the Action list.
4. Enter the VLAN ID to assign to the private VLAN.
5. Select Primary or Community from the Type list
6. Click Apply.
Figure 73: Configuring Private VLANs