LevelOne GTL-2691 - Manual (Page 109)

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 109 –
Configure by Port Range Configures connection settings for a range of ports 164
Show Information Displays port connection status 165
Mirror
Add Sets the source and target ports for mirroring 166
Show Shows the configured mirror sessions 166
Statistics Shows Interface, Etherlike, RMON and Utilization port statistics 168
Chart Shows Interface, Etherlike, RMON and Utilization port statistics 168
Cable Test Performs cable diagnostics for selected port to diagnose any cable
faults (short, open etc.) and report the cable length
172
Trunk
Static
Configure Trunk
Add Creates a trunk, along with the first port member 175
Show Shows the configured trunk identifiers 175
Add Member Specifies ports to group into static trunks 175
Show Member Shows the port members for the selected trunk 175
Configure General
Configure Configures trunk connection settings 175
Show Information Displays trunk connection settings 175
Dynamic 178
Configure Aggregator Configures administration key for specific LACP groups 178
Configure Aggregation Port
Configure
General Allows ports to dynamically join trunks 178
Actor Configures parameters for link aggregation group members on the
local side
178
Partner Configures parameters for link aggregation group members on the
remote side
178
Show Information
Counters Displays statistics for LACP protocol messages 183
Internal Displays configuration settings and operational state for the local
side of a link aggregation
184
Neighbors Displays configuration settings and operational state for the
remote side of a link aggregation
186
Configure Trunk
Configure Configures connection settings 178
Show Displays port connection status 178
Show Member Shows the active members in a trunk 178
Table 6: Switch Main Menu (Continued)
Menu Description Page