LevelOne GTL-2691 - Manual (Page 599)

C HAPTER 17 | IP Services
Domain Name Service
– 599 –
Figure 355: Configuring a List of Name Servers for DNS
To show the list name servers:
1. Click IP Service, DNS.
2. Select Show Name Servers from the Action list.
Figure 356: Showing the List of Name Servers for DNS
C ONFIGURING S TATIC
DNS H OST TO
A DDRESS E NTRIES
Use the IP Service > DNS - Static Host Table (Add) page to manually
configure static entries in the DNS table that are used to map domain
names to IP addresses.
CLI R EFERENCES
◆ "ip host" on page 1354
◆ "show hosts" on page 1358
C OMMAND U SAGE
◆ Static entries may be used for local devices connected directly to the
attached network, or for commonly used resources located elsewhere
on the network.
P ARAMETERS
These parameters are displayed:
◆ Host Name – Name of a host device that is mapped to one or more IP
addresses. (Range: 1-127 characters)
◆ IP Address – IPv4 address(es) associated with a host name.