Show map ip dscp, Show map ip port – LevelOne GTL-2691 User Manual
Page 1167
C
HAPTER
40
| Class of Service Commands
Priority Commands (Layer 3 and 4)
– 1167 –
show map ip dscp
This command shows the IP DSCP priority map.
S
YNTAX
show map ip dscp [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-26)
port-channel channel-id (Range: 1-32)
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#show map ip dscp ethernet 1/1
DSCP mapping status: Disabled
Port DSCP CoS
--------- ---- ---
Eth 1/ 1 0 0
Eth 1/ 1 1 0
Eth 1/ 1 2 0
Eth 1/ 1 3 0
.
.
.
Eth 1/ 1 61 0
Eth 1/ 1 62 0
Eth 1/ 1 63 0
Console#
show map ip port
This command shows the IP port priority map.
S
YNTAX
show map ip port [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-26)
port-channel channel-id (Range: 1-32)
C
OMMAND
M
ODE
Privileged Exec