Show spanning-tree – LevelOne GTL-2691 User Manual
Page 1086
C
HAPTER
37
| Spanning Tree Commands
– 1086 –
show spanning-tree
This command shows the configuration for the common spanning tree
(CST) or for an instance within the multiple spanning tree (MST).
S
YNTAX
show spanning-tree [interface | mst instance-id | brief]
interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-26)
port-channel channel-id (Range: 1-32)
instance-id - Instance identifier of the multiple spanning tree.
(Range: 0-4094, no leading zeroes)
brief - Shows a summary of global and interface settings.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
◆
Use the show spanning-tree command with no parameters to display
the spanning tree configuration for the switch for the Common
Spanning Tree (CST) and for every interface in the tree.
◆
Use the show spanning-tree interface command to display the
spanning tree configuration for an interface within the Common
Spanning Tree (CST).
◆
Use the show spanning-tree mst command to display the spanning
tree configuration for all instances within the Multiple Spanning Tree
(MST), including global settings and settings for active interfaces.
◆
Use the show spanning-tree mst instance-id command to display the
spanning tree configuration for an instance within the Multiple
Spanning Tree (MST), including global settings and settings for all
interfaces.
◆
For a description of the items displayed under “Spanning-tree
information,” see
"Configuring Global Settings for STA" on page 245
.
For a description of the items displayed for specific interfaces, see