LevelOne GTL-2691 - Manual (Page 131)

C HAPTER 4 | Basic Management Tasks
Displaying Switch Hardware/Software Versions
– 131 –
D ISPLAYING S WITCH H ARDWARE /S OFTWARE V ERSIONS
Use the System > Switch page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
CLI R EFERENCES
◆ "System Management Commands" on page 767
P ARAMETERS
The following parameters are displayed:
Main Board Information
◆ Serial Number – The serial number of the switch.
◆ Number of Ports – Number of built-in ports.
◆ Hardware Version – Hardware version of the main board.
◆ Internal Power Status – Displays the status of the internal power
supply.
Management Software Information
◆ Role – Shows that this switch is operating as Master or Slave.
◆ EPLD Version – Version number of EEPROM Programmable Logic
Device.
◆ Loader Version – Version number of loader code.
◆ Diagnostics Code Version – Version of Power-On Self-Test (POST)
and boot code.
◆ Operation Code Version – Version number of runtime code.
◆ Thermal Detector – The first detector is near the air flow intake
vents. The second detector is near the switch ASIC.
◆ Temperature – Temperature at specified thermal detection point.