LevelOne GTL-2691 - Manual (Page 138)

C HAPTER 4 | Basic Management Tasks
Managing System Files
– 138 –
If you replaced a file currently used for startup and want to start using the
new file, reboot the system via the System > Reset menu.
S ETTING T HE S TART -
U P F ILE
Use the System > File (Set Start-Up) page to specify the firmware or
configuration file to use for system initialization.
CLI R EFERENCES
◆ "whichboot" on page 785
◆ "boot system" on page 779
W EB I NTERFACE
To set a file to use for system initialization:
1. Click System, then File.
2. Select Set Start-Up from the Action list.
3. Mark the operation code or configuration file to be used at startup
4. Then click Apply.
Figure 9: Setting Start-Up Files
To start using the new firmware or configuration settings, reboot the
system via the System > Reset menu.
S HOWING S YSTEM
F ILES
Use the System > File (Show) page to show the files in the system
directory, or to delete a file.
N OTE :
Files designated for start-up, and the Factory_Default_Config.cfg
file, cannot be deleted.
CLI R EFERENCES
◆ "dir" on page 784
◆ "delete" on page 783