Changing the aging time, Figure 92: configuring static mac addresses, Figure 93: displaying static mac addresses – LevelOne GTL-2691 User Manual
Page 236: Address aging time
C
HAPTER
7
| Address Table Settings
Changing the Aging Time
– 236 –
4.
Click Apply.
Figure 92: Configuring Static MAC Addresses
To show the static addresses in MAC address table:
1.
Click MAC Address, Static.
2.
Select Show from the Action list.
Figure 93: Displaying Static MAC Addresses
C
HANGING
THE
A
GING
T
IME
Use the MAC Address > Dynamic (Configure Aging) page to set the aging
time for entries in the dynamic address table. The aging time is used to
age out dynamically learned forwarding information.
CLI R
EFERENCES
◆
"mac-address-table aging-time" on page 1055
P
ARAMETERS
These parameters are displayed:
◆
Aging Status – Enables/disables the function.
◆
Aging Time – The time after which a learned entry is discarded.
(Range: 10-1000000 seconds; Default: 300 seconds)