LevelOne GTL-2691 - Manual (Page 902)

C HAPTER 28 | Authentication Commands
802.1X Port Authentication
– 902 –
dot1x max-reauth-
req
This command sets the maximum number of times that the switch sends
an EAP-request/identity frame to the client before restarting the
authentication process. Use the no form to restore the default.
S YNTAX
dot1x max-reauth-req count
no dot1x max-reauth-req
count – The maximum number of requests (Range: 1-10)
D EFAULT
2
C OMMAND M ODE
Interface Configuration
E XAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x max-reauth-req 2
Console(config-if)#
dot1x max-req This command sets the maximum number of times the switch port will
retransmit an EAP request/identity packet to the client before it times out
the authentication session. Use the no form to restore the default.
S YNTAX
dot1x max-req count
no dot1x max-req
count – The maximum number of requests (Range: 1-10)
D EFAULT
2
C OMMAND M ODE
Interface Configuration
E XAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x max-req 2
Console(config-if)#