LevelOne GTL-2691 User Manual
Page 487
C
HAPTER
14
| Basic Administration Protocols
Connectivity Fault Management
– 487 –
◆
Multiple domains at the same maintenance level cannot have an MA on
"Configuring CFM Maintenance Domains" on
◆
Before removing an MA, first remove the MEPs assigned to it (see
"Configuring Maintenance End Points" on page 491
◆
For a detailed description of the MIP types, refer to the Command
Usage section under
"Configuring CFM Maintenance Domains" on
Configuring Detailed Settings for a Maintenance Association
◆
CCMs are multicast periodically by a MEP in order to discover other
MEPs in the same MA, and to assure connectivity to all other MEPs/MIPs
in the MA.
◆
Each CCM received is checked to verify that the MEP identifier field sent
in the message does not match its own MEP ID, which would indicate a
duplicate MEP or network loop. If these error types are not found, the
CCM is stored in the MEP’s local database until aged out.
◆
If a maintenance point fails to receive three consecutive CCMs from any
other MEP in the same MA, a connectivity failure is registered.
◆
If a maintenance point receives a CCM with an invalid MEPID or MA
level or an MA level lower than its own, a failure is registered which
indicates a configuration error or cross-connect error (i.e., overlapping
MAs).
◆
The interval at which CCMs are issued should be configured to detect
connectivity problems in a timely manner, as dictated by the nature and
size of the MA.
◆
The maintenance of a MIP CCM database by a MIP presents some
difficulty for bridges carrying a large number of Service Instances, and
for whose MEPs are issuing CCMs at a high frequency. For this reason,
slower CCM transmission rates may have to be used.
P
ARAMETERS
These parameters are displayed:
Creating a Maintenance Association
◆
MD Index – Domain index. (Range: 1-65535)
◆
MA Index – MA identifier. (Range: 0-2147483647)
◆
MA Name – MA name. (Range: 1-44 alphanumeric characters)
Each MA name must be unique within the CFM-managed network.
◆
Primary VLAN – Service VLAN ID. (Range: 1-4093)
This is the VLAN through which all CFM functions are executed for this
MA.