Show ip ospf neighbor – LevelOne GTL-2691 User Manual

Page 1512

Advertising
background image

C

HAPTER

49

| IP Routing Commands

Open Shortest Path First (OSPFv2)

– 1512 –

show ip ospf

neighbor

This command displays information about neighboring routers on each

interface within an OSPF area.

S

YNTAX

show ip ospf [process-id] neighbor

process-id - The ID of the router process for which information will

be displayed. (Range: 1-65535)

C

OMMAND

M

ODE

Privileged Exec

Network Type

Includes broadcast, non-broadcast, or point-to-point networks

Cost

Interface transmit cost

Transmit Delay

Interface transmit delay (in seconds)

State

◆

Disabled – OSPF not enabled on this interface

◆

Down – OSPF is enabled on this interface, but interface is down

◆

Loopback – This is a loopback interface

◆

Waiting – Router is trying to find the DR and BDR

◆

DR – Designated Router

◆

BDR – Backup Designated Router

◆

DRother – Interface is on a multiaccess network, but is not the DR or

BDR

Priority

Router priority

Designated

Router

Designated router ID and respective interface address

Backup

Designated

Router

Backup designated router ID and respective interface address

Timer intervals

Configuration settings for timer intervals, including Hello, Dead and

Retransmit

Neighbor Count Count of network neighbors and adjacent neighbors

Adjacent

neighbor count

Count of adjacent neighbors

Hello

Number of Hello LSAs received and sent

DD

Number of Database Descriptor packets received and sent.

LS-Req

Number of LSA requests

LS-Upd

Number of LSA updates

LS-Ack

Number of LSA acknowledgements

Discarded

Number of LSAs discarded

Table 213: show ip ospf interface - display description (Continued)

Field

Description

Advertising