LevelOne GTL-2691 - Manual (Page 1270)

C HAPTER 42 | Multicast Filtering Commands
IGMP Proxy Routing
– 1270 –
show ip igmp
interface
This command shows multicast information for the specified interface.
S YNTAX
show ip igmp interface [interface]
interface
vlan vlan-id - VLAN ID. (Range: 1-4093)
D EFAULT S ETTING
None
C OMMAND M ODE
Privileged Exec
E XAMPLE
The following example shows the IGMP configuration for VLAN 1, as well as
the device currently serving as the IGMP querier for active multicast
services on this interface.
Console#show ip igmp interface vlan 1
VLAN 1 : up
IGMP : Disabled
IGMP Version : 2
IGMP Proxy : Enabled
IGMP Unsolicited Report Interval : 400 sec
Robustness Variable : 2
Query Interval : 125 sec
Query Max Response Time : 100 (resolution in 0.1 sec)
Last Member Query Interval : 10 (resolution in 0.1 sec)
Querier : 0.0.0.0
Joined Groups :
Static Groups :
Console#
IGMP P ROXY R OUTING
This section describes commands used to configure IGMP Proxy Routing on
the switch.
Table 163: IGMP Proxy Commands
Command Function Mode
ip igmp proxy Enables IGMP proxy service for multicast routing IC
ip igmp proxy unsolicited-
report-interval
Specifies how often the upstream interface should
transmit unsolicited IGMP reports
IC
show ip igmp interface Displays multicast information for the specified
interface
PE