LevelOne GTL-2691 - Manual (Page 407)

C HAPTER 14 | Basic Administration Protocols
Configuring Event Logging
– 407 –
3. Enable or disable system logging, set the level of event messages to be
logged to flash memory and RAM.
4. Click Apply.
Figure 213: Configuring Settings for System Memory Logs
To show the error messages logged to system memory:
1. Click Administration, Log, System.
2. Select Show System Logs from the Step list.
3. Click RAM or Flash.
This page allows you to scroll through the logged system and event
messages. The switch can store up to 2048 log entries in temporary
random access memory (RAM; i.e., memory flushed on power reset)
and up to 4096 entries in permanent flash memory.
Figure 214: Showing Error Messages Logged to System Memory