Show gvrp configuration – LevelOne GTL-2691 User Manual
Page 1112
Advertising
C
HAPTER
39
| VLAN Commands
GVRP and Bridge Extension Commands
– 1112 –
C
OMMAND
M
ODE
Normal Exec, Privileged Exec
E
XAMPLE
Console#show garp timer ethernet 1/1
Eth 1/ 1 GARP Timer Status:
Join Timer : 20 centiseconds
Leave Timer : 60 centiseconds
Leave All Timer : 1000 centiseconds
Console#
R
ELATED
C
OMMANDS
show gvrp
configuration
This command shows if GVRP is enabled.
S
YNTAX
show gvrp configuration [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-26)
port-channel channel-id (Range: 1-32)
D
EFAULT
S
ETTING
Shows both global and interface-specific configuration.
C
OMMAND
M
ODE
Normal Exec, Privileged Exec
E
XAMPLE
Console#show gvrp configuration ethernet 1/7
Eth 1/ 7:
GVRP Configuration : Disabled
Console#
Advertising