Figure 91: configuring mac address learning – LevelOne GTL-2691 User Manual
Page 234
C
HAPTER
7
| Address Table Settings
Configuring MAC Address Learning
– 234 –
◆
Also note that MAC address learning cannot be disabled if any of the
following conditions exist:
■
802.1X Port Authentication has been globally enabled on the switch
(see
"Configuring 802.1X Global Settings" on page 384
■
Security Status (see
"Configuring Port Security" on page 380
enabled on the same interface.
P
ARAMETERS
These parameters are displayed:
◆
Interface – Displays a list of ports or trunks.
◆
Port – Port Identifier. (Range: 1-26)
◆
Trunk – Trunk Identifier. (Range: 1-32)
◆
Status – The status of MAC address learning. (Default: Enabled)
W
EB
I
NTERFACE
To enable or disable MAC address learning:
1.
Click MAC Address, Learning Status.
2.
Set the learning status for any interface.
3.
Click Apply.
Figure 91: Configuring MAC Address Learning