Ip igmp max-resp- interval, Ip igmp max-resp-interval – LevelOne GTL-2691 User Manual
Page 1263
C
HAPTER
42
| Multicast Filtering Commands
IGMP (Layer 3)
– 1263 –
E
XAMPLE
Console(config)#interface vlan 1
Console(config-if)#ip igmp last-member-query-interval 20
Console(config-if)#
ip igmp max-resp-
interval
This command configures the maximum response time advertised in IGMP
queries. Use the no form of this command to restore the default.
S
YNTAX
ip igmp max-resp-interval seconds
no ip igmp max-resp-interval
seconds - The report delay advertised in IGMP queries.
(Range: 0-255 tenths of a second)
D
EFAULT
S
ETTING
100 (10 seconds)
C
OMMAND
M
ODE
Interface Configuration (VLAN)
C
OMMAND
U
SAGE
◆
IGMPv1 does not support a configurable maximum response time for
query messages. It is fixed at 10 seconds for IGMPv1.
◆
By varying the Maximum Response Interval, the burstiness of IGMP
messages passed on the subnet can be tuned; where larger values
make the traffic less bursty, as host responses are spread out over a
larger interval.
◆
The number of seconds represented by the maximum response interval
must be less than the Query Interval (
).
E
XAMPLE
The following shows how to configure the maximum response time to 20
seconds.
Console(config-if)#ip igmp query-max-response-time 200
Console(config-if)#
R
ELATED
C
OMMANDS