LevelOne GTL-2691 - Manual (Page 165)

C HAPTER 5 | Interface Configuration
Port Configuration
– 165 –
W EB I NTERFACE
To configure port connection parameters:
1. Click Interface, Port, General.
2. Select Configure by Port Range from the Action List.
3. Enter to range of ports to which your configuration changes apply.
4. Modify the required interface settings.
5. Click Apply.
Figure 31: Configuring Connections by Port Range
D ISPLAYING
C ONNECTION S TATUS
Use the Interface > Port > General (Show Information) page to display the
current connection status, including link state, speed/duplex mode, flow
control, and auto-negotiation.
CLI R EFERENCES
◆ "show interfaces status" on page 1010
P ARAMETERS
These parameters are displayed:
◆ Port – Port identifier.
◆ Type – Indicates the port type. (1000BASE-T, 1000BASE SFP,
10GBASE-T, 10GBASE XFP)
◆ Name – Interface label.
◆ Admin – Shows if the port is enabled or disabled.
◆ Oper Status – Indicates if the link is Up or Down.