Table 15: cos priority levels – LevelOne GTL-2691 User Manual
Page 280
C
HAPTER
10
| Class of Service
Layer 2 Queue Settings
– 280 –
CLI R
EFERENCES
◆
◆
"show queue cos-map" on page 1160
C
OMMAND
U
SAGE
◆
Egress packets are placed into the hardware queues according to the
mapping defined by this command.
◆
The specified mapping applies to all interfaces.
P
ARAMETERS
These parameters are displayed:
◆
CoS – CoS value. (Range: 0-7, where 7 is the highest priority)
◆
Queue – Output queue buffer. (Range: 0-7, where 7 is the highest CoS
priority queue)
W
EB
I
NTERFACE
To specify which of the output queues to use for CoS priority tagged traffic:
1.
Click Traffic, Priority, CoS to Queue.
2.
Assign priorities to the output queues.
3.
Click Apply.
Table 15: CoS Priority Levels
Priority Level
Traffic Type
1
Background
2
(Spare)
0 (default)
Best Effort
3
Excellent Effort
4
Controlled Load
5
Video, less than 100 milliseconds latency and jitter
6
Voice, less than 10 milliseconds latency and jitter
7
Network Control