Lenze E94ARNE Regenerative power supply - Manual (Page 194)

9400 regenerative power supply module | Parameter setting
Diagnostics & fault analysis
Logbook
194
L
EDS94ARNExxxx EN 2.3 - 06/2014
8.4.3 Reading out logbook entries
When an online connection has been established, the existing logbook entries can easily
be displayed in the »Engineer«. Alternatively, the logbook entries can also be read out via
the corresponding parameters (e.g. using the keypad).

How to display logbook entries in the »Engineer«:
1. Go to the Project view and select the regenerative power supply module the
logbook entries of which are to be read out.
2. Click the icon to establish an online connection to the regenerative power
supply module.
3. Select the Diagnostics tab from the Workspace.
4. Click Logbook.
• The Logbook dialog box appears:
• Click Delete to delete an entry from the logbook.
5. Click Previous to close the Logbook dialog box.

Tip!
• Via the Export... button the logbook entries can be exported to a file.
 Exporting logbook entries to a file
( 195)