Lenze E94ARNE Regenerative power supply - Manual (Page 60)

9400 regenerative power supply module | Parameter setting
Device interface
Device commands
60
L
EDS94ARNExxxx EN 2.3 - 06/2014
4.1.20 Reset max. line power reg.
This function is available from software version V2.0 onwards!
The C00002 = "62: Reset max. line power reg." device command serves to reset the value
displayed in C00143/3 to zero. At the same time, the time stamp corresponding to this
display value ( C00144/3 ) is set to the current state of the elapsed-hour meter (= time of
reset).  Display of peak power
( 87)
Possible status displays for this device command
Related device commands
 Reset max DC power mot.
( 58)
 Reset max DC power reg.
( 59)
Status ( C00003 ) Meaning
4097282 Device command in process
4063232 Device command executed successfully
4063233 General fault